Japan PSE certification

PSE certification is a mandatory safety certification in Japan to prove that electrical and electronic products have passed the safety standards of the Japanese Electrical and Material Safety Law (DENAN Law) or the international 1653 IEC standard test. Japan's DENTORL Law (Electrical Devices and Materials Control Law) stipulates that 498 products must pass safety certification to enter the Japanese market. Among them, 165 types of A products should obtain the diamond-shaped PSE mark, and 333 types of B products should obtain the round PSE mark. All products belonging to the specific electrical supplies catalog, to enter the Japanese market, must be certified by a third-party certification body authorized by the Ministry of Economy, Trade and Industry of Japan, to obtain a certificate of conformity, and a diamond-shaped PSE mark on the nameplate.

Japanese product safety mark Japan's DENTORL law (Electrical Appliance and Material Control Law) stipulates that 498 kinds of products must pass safety certification to enter the Japanese market. Among them, 112 kinds of A products should obtain the diamond line certification, 340 kinds of B products should obtain the round line certification.

(A) PSE catalog list

According to the DENTORL law, 340 kinds of B products are divided into 7 parts:

1, simple wiring sleeves and junction boxes

2, 100V-300V between the simple single-phase motor

3, household electric heating products

4, household electric or electric game products

5, the use of light sources of civilian or household products

6, household and commercial electronic products

7, other electrical products between 100V-300V

From April 1, 2001 "Electrical Products Control Law (DENTORL)" officially changed its name to "Electrical Products Safety Law (DENAN)", which is different from the previous regulatory system of the agreement on the control, the new system will be unofficial institutions The new system will be controlled by an unofficial body to ensure the safety of products.

Class A: Designated electrical equipment and materials products

All products belonging to the list of "specific electrical appliances" must be certified by a third-party certification body authorized by the Ministry of Economy, Trade and Industry of Japan to enter the Japanese market, and obtain a certificate of conformity, which is poorly labeled with a diamond-shaped PSE mark, as shown in the figure:

 Such as: AC adapter Plugs Multi-tap

Class B: Other electrical equipment and materials products

All products belonging to the "Non-specific electrical appliances" catalog, entering the Japanese market, must undergo self-testing to confirm compliance with Japan's technical standards for electrical appliances, or commission a third-party certification body to conduct testing and obtain a certificate of conformity, with a circular PSE mark on the label, as shown in the figure:

 Such as: Copier TV DVD Player

Products not suitable for electrical safety law:
 PC, Monitor, Printer, Server Computer, Storage

(ii) Technical information:

Japanese voltage of AC 100V/50Hz, 100V/60Hz
 PSE will perform a factory inspection (to check the availability of relevant test equipment and its suitability), but there is no follow-up inspection. As each certification body in China to cooperate with different objects, responsible for the factory review in China is different institutions. Such as JQA's cooperation with the China Import and Export Inspection and Quarantine Bureau.

(C) The following organizations may submit applications for PSE mark conformity certification:

Japanese manufacturers
Japanese importer
Specify the Japanese importer has designated foreign manufacturers
Notification of suppliers can only be Japanese manufacturers / importers, notification of suppliers to obtain a certificate of compliance and PSE label, METI will be considered to bear the legal responsibility. Foreign manufacturers can not become notified suppliers, but must provide Japanese importers by the qualified ACAB issued a valid certificate of compliance.
(D) Required documents and information
Safety testing:

(E) PSE certification fees:

Due to different product testing requirements involve different testing costs, PSE certification costs are not a fixed fee, need to be assessed according to the product, different products PSE certification costs are different::

Round PSE includes testing fees, certification fees, no factory inspection, the cost is relatively low, such as ordinary humidifier PSE certification costs about 5,000 yuan, the cycle of 2 weeks; and electric water heater testing requirements more costly, its PSE certification costs in about 8,000 yuan, the cycle in about 3 weeks.

Diamond PSE more factory inspection links, diamond PSE certification costs include testing fees, certification fees, factory inspection fees. To the most common power products encountered, for example, PSE diamond-shaped costs are as follows: for example, power adapter PSE certification costs about 25,000 yuan, the cycle 6-8 weeks; and switching power supply PSE certification costs about 28,000 yuan, the cycle 6-8 weeks.

(F) diamond PSE certification and round PSE certification detailed comparison

Diamond-shaped PSE certification:

(1) diamond PSE is generally for components, especially key components such as electronic components.

(2) diamond PSE requires a longer audit cycle.

(3) diamond-shaped PSE certification direct issuing agencies are CQC, TUV, ITS, Japan JET.

(4) There must be a third party certification body that has received permission from the Ministry of Economy, Trade and Industry of Japan.

(5) According to the DENAN law, the manufacturer is obliged to keep the test results and proof.

(6) The label must have a diamond-shaped PSE logo.

(G) round pse certification:

(1) PSE round certification is generally for the whole product.

(2) round PSE does not require a short audit cycle.

(3) round PSE can be a Japanese-accredited laboratory for testing and certification.

(4) must be certified by a third-party certification body licensed by an international accreditation body.

(5) According to the DENAN law, the manufacturer is obliged to keep the test results and certification.

(6) The label must have the round PSE logo.

(H) PSE certification cycle

Depending on the application criteria and certification bodies and different, usually 4-6 weeks in the case of CB.

Without CB in the case of 6-10 weeks or so. (The information is complete, the sample does not need to rectify the situation)

(ix) PSE certificate validity:

Class A diamond-shaped have 3 years, 5 years, 7 years (depending on the product)

Class B round with 1 year, 2 years, 3 years (depending on the product)