General Product Safety CE markin

I. What is CE safety certification?

CE certification stands for CE mark, which is located on the back of certain products sold in the European Economic Area (EEA) and the European Union (EU). Literally, CE is an abbreviation of the French phrase meaning "European Conformity". When the CE seal is placed on the back of a product, the mark indicates that the product can be distributed in the EU and EEA.

It is well known that no matter whether the products are produced within the EU or in other countries, if they want to circulate freely in the EU market, they must be CE certified and affixed with the EU "CE" mark. Among them, many products have relative to the requirements of the Directive, such as pressure equipment CE certification (PED), explosion-proof CE certification (ATEX), noise CE certification (ND) and so on. So for general products without special requirements we can do what the directive certification?

Second, what is the GPSD safety certification?

GPSD certification is the general product safety CE certification puts forward the basic requirements of product quality and safety, applicable to all consumer products other than food, that is, GPSD certification applies to non-food consumer products, including all products that provide services, but does not include antique or second-hand products. So when we have to do CE certification, but found no corresponding instructions, may wish to consider the GPSD certification, that is, the general product safety CE certification! In short, when you want to do CE certification found that the EU CE certification-related directives, and your products are not food, antiques or second-hand products, then do GPSD directive is not far from the eight or nine. Products such as compliance with the relevant safety provisions of the European Community, do not determine that it is safe, otherwise, the product should comply with the regulations of the member state in which it is sold on the market, or comply with the voluntary national standards published in the Official Journal of the European Union European standardization.

Third, what is the GPSD Directive?

GPSD (General Product Safety Directive) that is, the General Product Safety Directive, in order to ensure the safety of consumer products, the General Product Safety Directive 2001/95 / EC (GPSD) to consumers placed on the market or may be used by consumers of any product (including all products) provides general safety requirements Provide services.

Anyone involved in the commercial development or quality assurance of products for the EU market will certainly be aware of the specific directives covering their products. As the latest technology develops, all industries and new products emerge, it is feasible that goods will begin to fall outside the scope of specific directives, or that goods not initially intended for consumer use will begin to be used by consumers. In these cases, the General Product Safety Directive (GPSD) 2001/95 EC applies.

The GPSD is the safety net used to protect the health and safety of all consumers and applies to all new and used goods in the region that do not fall under their own industry-specific regulations but are available for consumer use (whether or not they are actually used) Are suitable for consumers.

IV. Revision of the GPSD Directive

The European Commission has identified the need to improve the EU's general product safety regime. From 2009 to 2011, the Commission conducted a number of public consultations on revising the GPSD. Based on stakeholder input, the European Commission was able to identify four main areas for improvement:

Initiation of a standardized procedure for harmonization of safety assessment Market surveillance Consistency of obligations of cooperative economic operators

V. Purpose of GPSD certification

The GPSD aims to ensure a high level of product safety in the EU for consumer products which are not regulated by specialised product regulations (e.g. toys, chemicals, cosmetics, machinery, etc.), thereby protecting consumer health and safety and safeguarding the proper functioning of the harmonised market within the EU. The Directive also supplements some of the provisions not covered by the special product regulations, such as those relating to producer responsibility and the rights and obligations of competent authorities. The Directive applies to non-food consumer products, including all products that provide services, but does not include antique or second-hand products.

VI. The list of standards of the GPSD Directive published by the EU covers the following products:

(1) outdoor furniture: tables and chairs for camping, home use and rental

(2) gymnastics equipment: double bars, bars, high and low bars, jump boxes, vault and pommel horse, horizontal bars, balance beam, rings, trampoline, ribbed wood, ladder and climbing frame

(3) fixed training equipment: strength training equipment, treadmills, rowing exercises, steppers, ladders, wall climbers, ellipticals, bicycles with fixed wheels or no movable wheels for training

(4) furniture: folding beds, home beds and cradles

(5) children's products: baby walkers, portable hammocks and stanchions, indoor changing tables, baby carriers, water equipment, bicycle chairs, windows and balcony doors with consumer installation of anti-child locking devices and children's clothing on the drawstring and rope belt

(6) roller skates

(7) water and water with floating entertainment supplies

(8) decorative oil lamps

(9) bicycle: expansion of urban and hiking, young adults, mountain and racing bicycles, bicycle accessories carrier

(10) paragliding equipment including belts and emergency parachutes

(11) audio, sound and similar electronic appliances

(12) Inner louvers

(13) lighters

(14) diving accessories - depth gauge and depth and time combination measurement equipment

G. If all do not meet, the product should be assessed according to the following:

1. voluntary national standards transformed by other relevant European standards;

2. standards developed by the member country in which the product is sold;

3. recommendations of the Commission regarding product safety assessment guidelines;

4. codes of good practice in relevant areas;

5. the level of technological development

6. consumer expectations for safety.

Eight, GPSD product certification process

1. determine the directives and corresponding harmonization/testing standards needed for product certification;

2, to assess the level of consistency and testing;

3, EU notified bodies to assist and review technical documents;

4, the CE mark can be affixed and a declaration of conformity issued;

5, the product has been certified and can be traded in the EU.

Nine, general product safety GPSD directive application cycle

Product information is ready within 1-3 months to obtain the general product safety GPSD certification

According to the General Product Safety Directive, manufacturers are responsible for ensuring that the products sold on the market are safe. This provision applies to all products sold in the market, or otherwise supplied to consumers all products.